Date: Feb 08, 2006

Problems Resolved:

1. Bug report Item 11: The G700AP works when the range of IP in DHCP Server is wrong; however, it will show the warning message.

2. Bug report Item 16: Choosing 128Hex first without applying can’t return to the original setting when press “Cancel” button.

3. Bug report Item 17: Set G700AP as the repeater mode with WPA-PSK or WPA2-PSK and a wireless device connects to it. After we change the encryption to none or WEP, we must unplug and plug the power of the repeater. Otherwise, the wireless device can only connect to the repeater but it can’t ping the repeater.

4. Bug report Item 18: Set one G700AP as the AP mode. Set another G700AP as the repeater mode with WPA-PSK or WPA2-PSK and a wireless device connects to it. After we disable the wireless device, the repeater one will disconnect from the AP-mode AP.

5. Bug report Item 19: Set one G700AP as the AP mode, Set other two G700APs as the repeater mode with WPA-PSK or WPA2-PSK and a wireless device connects to it. After we change the encryption to none or WEP, the repeater function of the first repeater is easily failed.

6. Bug report Item 21: If there is a blank space in the SSID of AP, the repeater will omit the characters after the bland space. For example: Set SSID as “DWL G700AP” in the AP-mode AP and the repeater-mode AP. In the wireless device, the SSID of the AP-mode AP will show “DWL G700AP” and the SSID of the repeater-mode AP will show “DWL”.

Firmware: v2.10.r09

Hardware: B1

Date: Jan 10, 2006

Problems Resolved:

1. Bug report Item 6: It’s necessary to set the password every time when using the wizard.

2. Bug report Item 7: A wireless device can’t connect to G700AP when G700AP is set up as the repeater mode and the WPA-PSK or WPA2-PSK of AP is enabled.

3. Bug report Item 8: Setting one G700AP as a repeater and another one as the AP mode, the repeater one is easily disconnected from the AP-mode AP when the WPA-PSK or WPA2-PSK of AP is enabled.

4. Bug report Item 9: The encryption key can not be blank although we disable the WEP.

5. Bug report Item 11: The G700AP works when the range of IP in DHCP Server is wrong; however, it will show the warning message.

6. Bug report Item 12: G700AP can be set the LAN IP address from 127 to 224, and the LAN IP mask as 255.255.255.255.

7. Bug report Item 13: G700AP can be set the LAN IP address without warning message:

IP: 10.255.255.255 Mask: 255.0.0.0

IP: 172.255.0.255 Mask: 255.255.255.0

8. Bug report Item 15: After HW and FW is reset, the runtime checksum is 0000.

9. Bug report Item 16: Choosing 128Hex first without applying can’t return to the original setting when press “Cancel” button.

Firmware: v2.10.r08

Hardware: B1

Date: Dec 23, 2005

Enhancements:

1. Change Home and Status help page for D-link request.

Firmware: v2.10.r07

Hardware: B1