Events on the farm from May 2nd 2011 to June 23rd 2011

This log contains a lot of what can appear as " wining" but it serves to reflect my mental state during the stay, a relatively detailed log of events and how I overcame the obstacles that arose. It can also serve as an educational guide or a blueprint for which the goal is to create a more efficient time budget. Learning from other peoples mistakes is always preferable to making them all yourself. It should be possible to drastically reduce the time spent on preparation, assembly and manufacturing based on the experiences shared in this log.

Monday May 2 - Day 1: I drove up to the farm (2-2, 5 hours from the capital) with my newly leased Fiat Doblo with all the equipment and gear/clothing I needed. I spent most of the day moving and getting my equipment and gear into place.

Tuesday May 3 - Day 2: I built the fume hood from the PVC plates and screws that was enclosed in the box. It was like an IKEA set and after a few hours I had completed it. Despite of the suppliers assurances they had forgotten to include the 10 cm diameter plastic fume hood tube so I wasn't able to plug in the dust collector fan. I placed the hood on a regular 50 cm wooden living room table. I placed the 25kg heavy fan on a 1, 5 meter high shoe shelf that I just flipped over. I placed it next to one of the living room windows so that I could cut out a plastic sheet using the same measurements as the window. I opened up one of the windows and taped the plastic sheet with duct tape on the window frame and cut a 10cm diameter hole where the tube was supposed to come out. This is the optimal way of doing it as you won't have to cut in the wall or other surfaces. I would have to pick up a bendable vent tube tomorrow. I also covered the rest of the windows with curtains to block anyone trying to peek through. The fume hood was a very simple construction so if I had more time I would probably just build one myself and save 500 euro in the process.

Wednesday May 4 - Day 3: Finished creating the metal skeletons for the blast devices and completing other practical issues relating to gear and equipment.

Thursday May 5 - Day 4: I started to grind the aspirin tablets today, at first using a mortar and pestle. After a few hours my hands hurt and I realized this method wasn't going to work out for this quantity. I decided I wanted to try an untraditional method by pouring the tabs on a large plastic sheet on the floor, using gravity to crush them with my 20kg dumbbell. This method worked excellently and I was done in about 4 hours. Tonje, the owners girlfriend, called me that evening. Apparently she was taking a 2 week vacation to Gabon and she was leaving this Monday. What a blessing! She said she would come and pick up some equipment from their storage room in the barn once she came back. I reckon I can manage to complete everything within the next two weeks, providing I work hard and efficient!

Friday May 6 - Day 5: Started to synthesize acetylsalicylic acid from aspirin. Failed badly and ended up with converting the acetylsalicylic acid to worthless salicylic acid goo (at this point in time I didn't know it was salicylic acid but It seemed very difficult to dry the substance). The guide I was using was significantly lacking. I realized I didn't have any other contingency plan and I began to somewhat panic. As I was unable to find any solution online the next two hours I began to lose heart. As I had discarded my digital library of explosives guides I tried to locate guides, searching online with anonymizer software, for a completely different booster compound. As I realized that this task could take a week or maybe two my motivation and morale at plummeted. If I couldn't even synthesize the first phase of the easiest booster how on earth would I manage to synthesize DDNP?! My world crashed that day and I tried to develop an alternative plan. I went a restaurant in the northern town that evening and enjoyed a three course meal. I later watched a few episodes of " the Shield".

Saturday May 7 - Day 6: The only rational approach to this problem is to search online until I find a proper guide to synthesize aspirin powder into pure acetylsalicylic acid. After several hours of research my findings were extremely discouraging. All the guides I had found; mainly university level chemistry projects, required a suction filter pump and a chemistry air dryer. The even more discouraging news was that even with this equipment none of the university students managed to get a better yield than 30%! Omfg, this would mean that even with the equipment I would never acquire, my total yield would not surpass 30% which would severely cripple the overall plan... I went to another restaurant that evening (I find it an effective method for getting my morale up) to create a new plan. In any case; I appear to be fundamentally fucked If I cannot manage to find a solution soon.

Sunday May 8 - Day 7:

Failure is not an option for me. I continued my search on methods for the purification of salicylic acid online. After many hours of searching the net, using various search phrases, I managed to locate a single YouTube clip, with very few hits, which explained in detail an unconventional method for synthesizing acetylsalicylic acid from aspirin. However, the guy was using a suction filter pump and a laboratory air dryer but I figured I could bypass this requirement by using more funnel filters and by using an air drying method. According to the guy on the movie, he managed to achieve a 70-80% yield! This method seemed to be viable and I would try to create a batch the next day.

Monday May 9 - Day 8: I tried the unconventional method for synthesizing acetylsalicylic acid with a promising result. I couldn't actually confirm that the product I had was in fact purified acetylsalicylic acid so should I take a chance and manufacture it all using this method? Considering the fact that I had wasted so much time, I decided that I had no other choice than to initiate mass production even though I risked ruining all my aspirin. Because if I were to wait for a small batch, It would simply take too long, so I had no other choice than to take this calculated risk.

Tuesday May 10 - Day 9: Considering the fact that I had wasted so many days and literally been at a standstill I felt a sudden need to create an evacuation plan as I didn't have any. What would I do if the owners wife caught me, or the neighbour or anyone else? I needed to work out a plan for this potential scenario. The evacuation plan involved a 10 minute evacuation. I would have to back my largest backpack with survival gear and relating equipment, including survival rations, 10L of water, weapons, ammo and suitable clothing. I started to prepare the above.

Wednesday May 11 - Day 10: I completed packing an evacuation kit. I felt a lot more safe and prepared for any emergency once I was done. When I returned from the southern town later that day, I saw two military 12 man teams, armed to the teeth, just 2000m south of my farm. The largest military base in the country is located just a few kilometers north-east of my farm and their territory extends almost all the way down to my property. They have notified all their neighbours, me included, that they are conducting a large military training session as to prepare a new division of soldiers for the war against the Taliban and al-Qaida in Afghanistan. It's quite ironic being situated practically on top of the largest military base in the country. It would have saved me a lot of hassle if I could just " borrow" a cup of sugar and 3kg of C4 from my dear neighbour: -)

Thursday May 12 - Day 11: As the acetylsalicylic acid purification and the rest of the picric acid production required a substantial amount of mineral and distilled ice cubes I spent the whole day converting water to ice cubes; a total of 50L converted whereas 20% of it was from mineral water. I ended up completely filling up a very large freezer with ice-cube-plastic-pocket-sheets.

Friday May 13 - Day 12: As the acid manufacturing went too slow I bought more funnels at the local store, to up the production rate. I continued to synthesize acetylsalicylic acid from aspirin that day.

Saturday May 14 - Day 13: I continued to synthesize acetylsalicylic acid from aspirin.

It's the Eurovision finale today. I just love Eurovision...!: -) It's a lot of crap music but I think it's a great show all in all. I've seen all the semi finals and will take the time of to watch it later today, online. My country has a crap, politically correct contribution as always. An asylum seeker from Kenya, performing a bongo song, very representative of Europe and my country... In any case; I hope Germany wins!

Sunday May 15 - Day 14: At the last batch of preparing pure acetylsalicylic acid my hot plate stirrer broke down. The magnetic mechanism stopped working. Fuck, Chinese piece of shit equipment, I should have rather paid more to get good European quality machinery...! What should I do now? Creating picric acid and DDNP without a magnetic hotplate stirrer would be very labour intensive and difficult and ordering a new product from a national supplier would take at least two weeks... I really don't have much choice in the matter. I'm ordering a new plate today and I can focus on the non-chemistry tasks until I receive it.

I managed to completed to synthesize the last batch of acetylsalicylic acid from aspirin without my hot plate stirrer. I now had to dry it. After scraping out all the content from the filter papers I spread the content evenly on several plastic boards. At first I put the boards in normal room temperature, but as this proved to be a very slow method I ended up placing the boards in a small room with a oven at maximum temperature (around 30C). In retrospect I realize I would have saved several days by just drying the purified acetylsalicylic acid in a Pyrex dish in the oven at 50-70C, but even now I am not sure what effect heat above 30C would have on the acid. I am 70% certain it would be the optimal method though as this oven method works (confirmed) on drying both PA and DDNP.

Monday May 16 - Day 15: Mixing up and further drying all the acetylsalicylic acid on the plastic boards.

Tuesday May 17 - Day 16: Since I cannot continue on the chemistry phase, due to the lack of a hot plate stirrer, I started boiling my sulfuric acid outside. I initially bought 3 specialty induction plates (flat porcelain) but they didn't function as my 2L beakers didn't cover the minimum diameter required for the induction plates to function. I began with one hot plate and created boiling stones by crushing a few small lab beakers. The boiling stones only made the boiling more difficult and complicated so ended up without the use of boiling stones.

Wednesday May 18 - Day 17: Continued boiling, now with three regular plates for maximum efficiency. Boiled after dark as the smoke generated as the acid surpassed 70% was so thick and compact that it would surely alert neighbours even several miles away.

Thursday May 19 - Day 18: Wanted to set on a plate, boiling sulfuric acid, while I did some shopping in the northern town. I noticed someone lurking outside the door and saw the neighbour. There was a BMW in the upper barn area he was going to fix up for the owner. As I was about to go outside in full protective suit, he almost saw me before I saw him. I helped him push out the car and gave him the gasoline required to drive it to his place. I'm going to stick to nighttime boiling from now on to reduce my exposure to any unwanted surprises. I was very lucky today, something I cannot take for granted in the future.

It's essential to create as much goodwill you can from the neighbours. Use any opportunity to generate goodwill from them. This goodwill will be returned indirectly by them not probing and investigating. If you get a visit from neighbours, be polite and friendly, offer them sandwiches and coffee, unless it will jeopardize the operation. The goodwill generated is likely to be to your benefit later on.

Friday May 20 - Day 19: Finished boiling sulfuric acid

Saturday May 21 - Day 20: Went to the capital to pick up a few parcels; 5 large packages of micro balloons and 50 more liters of distilled water. I also purchased a 50kg weight dumbbell set for fertilizer grinding, costing 700 euro, as It would most likely be the best way to crush the fertilizer prills using this method.

On my way home to the farm I noticed what I believed to be a civilian police vehicle south of the southern town (30km from the farm). At this point in time I remembered I had forgotten to turn on the lights on the car since I tested out my blue LED lights the day before. Hmm, they should have stopped me for this violation. Very weird. As I came closer to the farm I noticed what I believed to be another civilian police car. Damn, I got a really bad feeling about this and my instincts told me I was about to be apprehended. Too many red flags were lit. I stopped 500 meters before the farm entrance and had a smoke, preparing mentally for a potential welcoming party at the farm. What should I do if I was about to be SWAT raped by a 6 or 12 man team? I didn't have any weapons available as they were all inside the main house. Should I make a run for it, if so, where would I go? Would I have time to fetch my evacuation kit, and should I try to get it and shoot my way out?

After the break I approached the farm, and turned on the fog lights on the car so that I could have an advantage should they approach me from the front. I stopped 50 meters north of the main house and I was shocked at the sight that awaited me...! The barn door was wide open!!! Someone was here! They were probably circling me right now or waiting for me inside the main house! I waited 20 minutes with the fog light aimed straight at the direction I expected them to come from. Perhaps they are not here, maybe they just installed monitoring equipment like they often do? I entered the house, picked up the glock and searched the house and the barn. Nothing. I began searching for monitoring equipment, nothing...

Paranoia can be a good thing, or it can be a curse. The barn door had probably been opened by the wind. I decided then and there that I would not allow paranoia to get the best of me again. If they were to come for me one day, there was really nothing I could do about it, so it would not be constructive to worry about it.

Sunday May 22 - Day 21: Started relocation of fertilizer. Broke down a 600kg bag into 13-14 x 50kg bags, loaded in the truck, drove 100 meters and carried them with a " carry trolley" into the barn. Did a full 600kg bag. Was exhausted.

Monday May 23 - Day 22: Initiated the fertilizer grinding phase. I was unsure whether I had to pulverize the fertilizer or not. Most guides said it was a positive thing as some fertilizer prills are coated with an anti-absorbing layer. I crushing a small batch, placed it in a plastic bag and soaking it in diesel, I also prepared another small bag of prills and soaked that in fuel to see whether it would absorb any liquid. Updated log

Tuesday May 24 - Day 23: The prills had not absorbed any diesel at all, during the last 24 hours, so I concluded that the only approach is to pulverize the 5 x 600 bags of 27-0-0 AN fertilizer. I cleaned the concrete floor in the barn thoroughly and poured 50kg of fertilizer prills on it, spreading it evenly so that I could roll the 50kg dumbbell back and forth to crush it, and then use a broom and spade to gather up the pulverized AN before it had absorbed a lot of moisture from the air. I was sure that this method would work as I managed to semi-crush the prills with my 20kg dumbbell. If a 20kg dumbbell almost could do it, then surely, a 50kg dumbbell would ensure excellent grinding. I estimated that I could grind 50kg within 20 minutes, 3 times faster than any other method I had heard of.

To my great disappointment, crushing the prills with the dumbbell failed miserably. The prills were only partially crushed and rolling the dumbbell proved to be an especially labour intensive experience. Also, the crushed prills absorbed moisture much faster than anticipated so the time required for me to crush 50kg (2 hours) would result in more or less AN powder fully saturated with water moisture... Fuck, why can't anything go as planned???? And the dumbbell set cost me a total of 750 euro and now it has proven to be worthless... What do I do now?

Wednesday May 25 - Day 24: As this was a big setback, I decided to seek comfort and attempting to erect my morale, which was currently in the toilet, at the restaurant in the northern town, ordering a three course meal while readjusting the plan. I had previously heard of a Marxist terrorist traitor in the early 70s. I believe he was called Baader or could it have been Meinhof, terror prostitutes for the Soviets and loyal dhimmi whores of the Islamic Ummah. Anyway; I remember reading about him using electrical mixers to crush AN prills in his apartment. Apparently, he had purchases several crates of these mixers and used several simultaneously for efficiency. I'm going to test this out shortly. If electrical mixers/blenders from the 70s could do it then surely; new modern blenders can!

Thursday May 26 - Day 25: Shopping for blenders. Bought around 12 - stationary and handheld, different brands for testing.

Friday May 27 - Day 26: Started crushing fert prills, testing out the various blenders. More than half of them where completely useless as the shape of the container prevented proper circulation of the prills after crushing them. A suitable blender will ensure flawless circulation and result in a fully crushed batch within a reasonable time frame. Found a perfect blender; Electrolux. which was able to fully crush 95% of the prills, in portions of 0, 5-0, 7kg within 20-35 seconds.

Saturday May 28 - Day 27: They had the Electrolux stationary blender in limited supply so I had to drive all day to purchase 6 from three different cities.

Sunday May 29 - Day 28: Continued relocation of the fertilizer. Did another 600kg bag.

Monday May 30 - Day 29: Completed the third 600kg bag. I could hardly move my fingers and I was certain that I had damaged them permanently. I decided to limit the process to three bags as the work required to process 5 bags (3000kg) would simply be too exhausting for one person...

Tuesday May 31 - Day 30: I had to rest the whole day as I was completely exhausted...

Wednesday June 1 - Day 31: Updating log

Thursday June 2 - Day 32: I saw a car driving through the property while I was surfing the net. As I went to greet him I noticed he was taking pictures of the farm. He, around 50-60, said he was a tourist wanting to take landscape pictures. His actions and body language indicated however that he was lying. My instinct told me that he was a police officer. I offered him coffee and suggested he should go down to the river bank as it was the optimal place for taking photos. I noticed that he continued to take pictures of the farm. When he approached the house I chatted with him again. From what I understood, reading his body language and between the lines, he worked for the police and he was following up on the " marijuana farm" case. He disclosed that his daughter was a drug-sniffer-dog trainer. He was probably taking pictures in relation to this case. I told him that some people had set up a marijuana farm here a few years back. He seemed surprise, although he probably knew that already. This encounter was a concern for me for a few days, but I decided to just forget it as it wasn't anything to do about it if he was to return. I'm just glad I gave him a good impression.

I decided to begin crushing the fertilizer using four Electrolux blenders simultaneously. However, it made a lot of noise so I decided to do this work from 23.00 to 07.00. I managed to complete 5 x 50kg bags, mixing in diesel 4 times per bag to distribute it evenly, then closing both the inner and outer bags properly using 5 individual pieces of duct tape. It is essential to hurry to place the crushed AN into the bag as it will begin to draw moisture from the air immediately after it is crushed, even while being inside the blender container.

Friday June 3 - Day 33: Continued crushing prills and mixing with diesel. I got into a good routine and managed to complete 10 bags. Very exhausting. I spent around 1 hour for each of the first few bags the day before, but managed to increase efficiency so that I completed 1 bag every 40 minutes (optimal achievement was 1 bag per 32 minutes). 20 bags to go... 2 of the blenders broke after processing 12 bags, even though I used it on the lowest power alternative. Replaced them with new ones.

Saturday June 4 - Day 34: Completed 6 bags.

Sunday June 5 - Day 35: Completed 4 bags. 2 more blenders broke down. I have to buy a couple of new ones tomorrow.

Monday June 6 - Day 36: Bought two more blenders. Completed crushing 1600kg of fertilizer prills and mixing with diesel. I'm going to save the last 200kg and possibly use it as an " inner charge" mixed with purified RC fuel (nitro methane). I will most likely only have enough nitro for 1 x inner charge though. After completion of the grinding, it was prills and AN dust all over the place:)) My green AN-crushing clothing were now grey... Surely, I'm going to die from cancer within 12 months as I must have gotten a lot of this crap into my lungs even though I used a 3M mask... It took a while to clean it all up to prepare for the next phase.

Watching " The Shield", a couple of episodes each day on average. I downloaded all 7 seasons in the start of May.

Tuesday June 7 - Day 37: Went to the capital and picked up the new hot plate stirrer that had arrived.

Wednesday June 8 - Day 38: Started synthesizing picric acid, completed 1 out of 10 batches.

Thursday June 9 - Day 39: I heard someone parking their car outside the house today. It was one of the neighbours wanting to buy the current crop as animal food. As I hadn't had the time to plant a crop of my own, the current one was primarily timotei and clover - used for food to cows and sheep. We discussed the issue for a while and I explained my situation to him. We agreed that he could harvest the current crop. He would return within 14 days to initiate the harvesting. I offered him a good price. As we strolled down to the field I was somewhat concerned that he would notice the fume hood fan pipe sticking out of the living room window...

Continued synthesizing 2 and 3 of 10 batches of picric acid and placing the finished compound to dry. It took a long time to complete the nitration of the acid due to the fact that I only had 1 hot plate stirrer. If I had 3 I would be able to complete all the PA within 2-3 days. Damn, something went wrong with these two batches. The solution was red and it failed to nitrate properly. I concluded that I must have used a bottle containing 37% sulfuric acid, instead of the required 90%+...

Friday June 10 - Day 40: Continued synthesizing 4 and 5 of 10 batches picric acid and placing the finished compound to dry. I placed 50g of my best batch in the oven to prepare for testing and to use it for DDNP manufacturing. Potent PA should burn when lit with flame.

To my great disappointment, nothing happened when I did the fire test...! What the hell, how is that possible, it was completely dry and that particular batch was manufactured perfectly according to specifications!? I did everything according to specifications... Could the compound I have manufactured be inert???? Unfortunate circumstances rams cock in arse once again...! I started to have serious doubts and my morale and motivation started to shatter...

I concluded that given the recent events, I would now have to move forward with operation B, at least continue to complete all preparations for this as the primary operation seemed to wither away.

Saturday June 11 - Day 41: As I was doing research on the net, a thunder storm approached, but it was still very far away. I have never had any problems with electrical overcharges the last 15 years because I always use specialty electrical outputs with gas cylinder electrical overcharge protection. Suddenly my PC made a relatively large bang, and the electricity went out. Once electricity was back on I noticed that my PC was dead. FFS, not again... As it was in the evening, I couldn't fix it until Monday...

I prayed for the first time in a very long time today. I explained to God that unless he wanted the Marxist-Islamic alliance and the certain Islamic takeover of Europe to completely annihilate European Christendom within the next hundred years he must ensure that the warriors fighting for the preservation of European Christendom prevail. He must ensure that I succeed with my mission and as such; contribute to inspire thousands of other revolutionary conservatives/nationalists; anti-Communists and anti-Islamists throughout the European world.

Sunday June 12 - Day 42: Although highly demoralized, I decided to do one last test of the PA compound. I decided to create a batch of DDNP using my best batch of picric acid. This was to be my last attempt to move ahead with operation A. I didn't have much faith in creating such a difficult compound as DDNP when I couldn't even manage to create a decent batch of PA... I spent most of the day preparing that batch of DDNP, then drying it in the oven for 4 hours.

Monday June 13 - Day 43: I prepared a test device today and drove off to a very isolated site. The test bomb was composed of a 3g DDNP primary and a 30g PA secondary. If this test would fail, I would abandon operation A and move forward with the non-spectacular operation B.

I lit the fuse, went out of range and waited. It was probably the longest 10 seconds I have ever endured...

BOOM! The detonation was successful!!!: -) I quickly drove away to avoid any potential unwanted attention, from people in the vicinity. I would have to come back a few hours later to investigate the blast hole, to see if both compounds had detonated.

A few hours later, after returning from a restaurant in the southern town to celebrate this success, I went back to the blast site to evaluate the detonation. The DDNP primary detonated successfully but the dry picric acid booster did not detonate at all. So I confirmed that the PA was not inert, just of a very low purity grade. This could be sorted as I would now move forward with purification after completion of the last PA batches. Today was a very good day as I really needed this success.

Tuesday June 14 - Day 44: Continued synthesizing picric acid and placing the finished compound to dry.

Wednesday June 15 - Day 45: Continued synthesizing picric acid and placing the finished compound to dry.

Thursday June 16 - Day 46: Began purification of the PA compound.

Friday June 17 - Day 47: At this point in time, considering that this project has taken much longer than anticipated, I was in a serious liquidity squeeze. The fertilizer invoice on 4500 euro should have been paid on May 19th. I had called to the company and asked for an increase grace period and they said it was ok as long as I paid before June 8th. This was almost 10 days ago and I received a follow up notice today stating that they would forward the invoice to the credit collection company on June 22nd. In addition to this; the farm rent for July, 1250 euro, was due on June 25th and the invoice for the fume hood, the hot plate stirrer and my secondary fan, which I wasn't even going to use, 2800 euro, was due on June 26th. This would mean that I would officially default on the payment and receive a credit warning, which would basically blacklist me and thus preventing me from renting a car, as the car rental companies always perform a credit check. Needless to say; this problem could sabotage the whole operation and I needed to sort this out asap or the operation would be over before it had even started... I needed to acquire 8550 euro within a week! As I had 1500 in cash and in my primary account, I decided my only choice was to aggressively withdraw funds from all my 10 credit cards but even that wouldn't be enough because of the weekly capacity limit. I called the farming supplier and made an agreement where I would pay half the amount now and the rest in July. They agreed. After aggressive cash withdrawal I managed to acquire the necessary funds, which allowed me to keep my head above the water until mid July.

At first, I thought I would manage to create enough picric acid booster material (1, 5kg in total) to disregard the addition of AL powder. But considering the fact that I would only manage to produce aprox 200-300g of booster I had no choice than to continue to prepare my 150kg of aluminium powder for addition in the ANFO.

The 150kg of AL came in 4 hermetically sealed drums each containing around 37kg of AL. After reading the " security precautions", however, I was completely freaked out. The drum openings where wielded with a soft metallic substance so it would be difficult to open them without taking extreme risk. The warnings stated; contact with oxygen will risk detonation of the AL powder, contact with metal, concrete and even plastic will significantly increase the chance of static electricity which can cause a detonation. Friction and shock can also cause detonation. Close proximity of oxidizers (gas, diesel) or close proximity to electrical outputs etc. can cause detonation.

I first planned on creating an outdoor mechanism that allowed me to thrust a steel spear like object, by using gravity, creating a 3 cm hole in the top of the drum. However, I ended up taking a regular knife and starting to file down the wielded enclosement, even if it involved high risk. At this point in time I was very concerned for a potential detonation. If the barrel of AL powder was to detonate and I somehow survived, I would probably lose both arms instantly severely. The blast wave/flame would probably cauterize my wounds resulting in an extended and extremely painful death. The most pragmatical approach to solving this potential problem was to place my loaded glock 34 close to the work area. And if I survived a detonation, losing both my arms, I could still fire a round to my head, in order to prevent un-necessary suffering using my toe to trigger.

Eventually, I manage to file open the enclosement. I then considered putting the drum upside down in one of my empty fertilizer bags to prevent the presence of high levels of oxygen.

This method proved to be too exhausting since I had to hold up the 37kg drum with my hands. I ended up with putting a large 3 x 4m plastic sheet on the concrete floor and carefully pouring the AL powder out of the opening. Small clouds of dust began to generate but nothing happened. I carefully continued until the drum was empty rolling the side of the drum in a circular pattern from the center of the AL powder already poured out, until the drum was empty. There were small clouds of AL powder generated but the biggest one was aprox 20 cm in diameter, which settled down after a while. I continued after the small clouds had settled. It's also worth noting that I had closed all the windows of the cellar basement so the humidity was relatively high, while oxygen level was below average.

In any case, this method worked well and I had gathered all the AL powder on the sheet, and thus preparing it for the addition to the ANFO.

Since I had solved the AL problem, I continued the purification of the PA.

Saturday June 18 - Day 48: I woke up at 11.00 and checked my phone. There was an SMS sent 09.30 from Tonje, the owners girlfriend. She said she was ON HER WAY UP to pick up some equipment from the barn!!! Omfg; considering the fact that it's a 2-2, 5 hour's drive from the capital she would be here in about half an hour!!! I'm so fucked! She has a large storage room in the back of the barn and she would need to pass all my ANFO bags to get there. I would need 12 hours minimum to relocate the 1, 2 tons of ANFO, not to mention de-construct my chemistry rig, fume hood, fan and clean up all the beakers etc spread all around. And the living room is full of yellow stains. It seems I will be left no choice than to use my glock and initiate the evacuation plan!

I called her up. Luckily she hadn't left yet. Thank God! I fed her a story which resulted in us agreeing that she would come on Monday around 20.00. That was a real close one... I spent the rest of the day on purifying another batch of picric acid and relocating 1, 2 tons of ANFO bags, storing them in the storage area between the corn silo and another room. I refer to this area as the spider cave or the spider room as there is no lighting there and it is spider webs all over the place. It is a lot of old junk in this room covered with spider webs.

Sunday June 19 - Day 49: I spent much of the day relocating equipment and storing them in the second floor of the house. I covered all the stains on the floor with a rug and covered the living room table with a blanket.

Monday June 20 - Day 50: I spent the day purifying a batch of PA and cleaning all the beakers for storage. I went all over the property to ensure that it would be presentable for today's visit. There was a 37kg pile of aluminium powder on plastic sheet I was unable to move so I covered it up as best as I could. There was also a lot of stains on the work bench in the barn I was unable to do anything about. Then there was the 1, 8 tons of ANFO bags and equipment stashed in the spider cave. I covered it up properly but she would easily notice the diesel smell from the bags and uncover it if she went in there... The fate of the whole operation relies on her not noticing. She came to the farm around 20.30. We talked for a while and she said she wanted to stay the night, sleeping in one of the outhouses. It was late in the evening so she wanted to spend the next day getting things from her storage room. I said it was fine and I fed her a story about me having to salvage much of the fertilizer for long term storage, seeing that I would not be able to sow the planned crop (sugar beets) due to too much rocks in the soil. I needed her to be prepared in case she went into the spider room. I just hope she would let me know if she got suspicious the next day so I could take necessary action...

Tuesday June 21 - Day 51: I woke up earlier that day to ensure that she didn't start sniffing around in the house without me being there. At this point in time I figured it was a 50% chance she would get suspicious enough to contact the authorities. I made her some sandwiches and coffee later that day and we chatted for a couple of hours in the living room of the main house. It would seem as she hadn't noticed anything, at least this is how I interpreted her tone, body language and judging from the topics we discussed. She went off later that day, and I figured that I would very shortly get a visit from the authorities if she forwarded her potential suspicions. In any case; there was nothing I could do if it came down to that...

Wednesday June 22 - Day 52: I reinstalled Windows 7 on my PC hoping that it would solve my network problems. It didn't work and I figured it had to be the network card or the phone line itself. I drove to the PC-repair guy in the local town and delivered it. It should be ready by tomorrow. I continued to prepare the chemistry equipment for getting ready to manufacture all DDNP batches. When I was done I completed the last purification batch of the unpurified picric acid and ended up with several liters of PA liquid that had to be chilled. I then drove to the local town and bought three portions of Chinese takeaway. Beef with noodles and fried rice, yummy!. I took an early night as I didn't have any PC.

Thursday June 23 - Day 53: I went to the PC-repair guy in the local town today and he brought very good news. Apparently, it was only the network card that had short circuited so he had replaced it with a new one and I should now finally be able to get online. Once back at the farm I got online and paid the outstanding on the remaining of my 9 credit cards so I wouldn't default on any of the outstanding amounts. When I was about to log into the site of the 10th and last credit card provider my PC went poof and the power went down in the house! Seconds later I heard a large thunder. What the hell, not again!!! And it isn't even raining ffs. I was able to get the PC running again without problems but my DSL-modem short circuited from the lightning strike as an electrical surge went through the phone line again. How is it possible to be this unlucky?! Only two hours after I've had my PC fixed nature comes and rapes me again... Thank god it was only my DSL-modem was destroyed as I have two extra DSL-modems left...; P Nevertheless, my morale took a small dent and I decided to get it back up by watching two episodes or Rome and enjoying nice Chinese takeaway. Later that day set up the fume hood and fan, carrying it down from the second floor, carried down the PA liquid in all the beakers down to the cold cellar, awaiting further chilling in the refrigerator. I then prepared for the first large batch of DDNP, halfway completing it before putting the semi finished product in the fridge.

Friday June 24 - Day 54: I continued on the second stage of the first large DDNP batch today, relocated some of the containers with PA liquid from the cellar to the fridge and updated the log. I couldn't start another badge due to the fact that I only have two 2 liter beakers, very annoying. The worst part about synthesizing formulas with a lacking amount of equipment is the downtime due to waiting for natural heating or chilling of compounds. The whole house is stinking of chems now. DDNP liquid smells like fresh egg fart...< 3 And I had to close all the windows to contribute for the liquid to reach room temp faster. All these chemical fumes cant possible be very healthy... I would have probably died from cancer within the next 12 months; P

Saturday June 25 - Day 55: Finished first large batch of the DDNP today. The result, after drying should be approximately 5-12g after purification. As the first half of the PA liquid had been chilled in the fridge for 18 hours I went ahead and funnel filtered out the crystals. As this was supposed to be the best batch of PA I was extremely disappointed to see that there had been minimal precipitation of crystals in the liquid. It should have been 15g of crystals for each liter but it turned out to be 2g per liter. The only rational explanation is that the purification method I am using is significantly flawed. However, considering the fact that I tried putting ice in the beakers and even putting them in the freezer with poor results, I really do not know what has gone wrong. The only alternative reason would be that I used a flawed manufacturing method of PA or that I should have purified the acetylsalicylic acid prior to initiating the PA manufacturing. As I can't really do anything at this point regardless, I would like to think it's the purification method and not the manufacturing method. After I had scraped out the yellow PA crystals and the brown DDNP crystals putting them in plastic boxes and placing them in the cold cellar I went to do some shopping in the northern town. There is a festival and there was a lot of things happening, a faire, various food stands, concerts etc. Since this town has a limited variety of fast food I decided to drive down to the southern town, eat and pick up some Chinese takeaway. There was a relatively hot girl on the restaurant today checking me out. Refined individuals like myself is a rare commodity here so I notice I do get a lot of attention in both the southern and the northern town. It's the way I dress and look. There are mostly unrefined/un-cultivated people living here. I wear mostly the best pieces from my former life, which consists of very expensive brand clothing, LaCoste sweaters, piques etc. People can see from a mile away that I'm not from around here.

Later that day I initiated a new batch of DDNP. As I completed the first phase I noticed one of my two 2L beakers had a large crack in the bottom and drops of liquid was coming out. I was very lucky the beaker hadn't completely cracked open as it would have destroyed my hot plate stirrer for sure. I remember there was a tiny crack that appeared during sulfuric acid purification when I was boiling as a madman outside. Now the beaker is ruined. To be honest; I'm surprised this hasn't happened earlier as I've abused these two beakers excessively. I made a mistake by buying only two 2L beakers instead of 4-5. That mistake has cost me at least 3-4 days in total. The loss of this beaker poses a significant problem as I relied on these two beakers to take me through the whole manufacturing process. If I go down a size and use the last 1L beaker I have left (I managed to break one during washing after boiling all the sulfuric acid outside. it will take me an extra day to complete the DDNP manufacturing. I'll see what I'll do later today. While waiting for the liquid to reach 4C in the fridge I went to train for the second time since I came to the farm. I used two backpacks, one in front and one on the back, with a total weight of 27kg. In addition I filled a container with 5L of liquid and held it with my left and then right arm partly stretched out in front of me. I took a 20 minute walk with these weights and it was a great exercise. As always I take protein powder + creatine before and after the exercise to maximize the outcome. I'm almost out of my steroid/winstrol tabs now as this project has taken significantly longer than expected. I only have a few days left worth of tabs so I have to sort this out in the coming days. I was thinking of traveling back to the capital and restock after I complete the DDNP production. Damn, the most annoying thing about synthesizing DDNP is that you have to wait 12 hours for the liquid to reach 4C in the fridge, later on you have to wait 3-5 hours for the compound to chill from boiling to room temperature and at the last phase you need to wait 12-18 hours for the liquid to go from 4C to room temperature. In other words, one batch of DDNP takes approximately 40 hours. If I had 6 x 2L beakers instead of 2, it would allow me to complete 3 batches in less than 2 days (45 hours), instead of having to spend more than 5 days (120 hours) due to lack equipment...

Sunday June 26 - Day 56: Completed the second and third phase of the second batch of DDNP. I moved the last batch of PA liquid from the cellar to the fridge. Updating log.

I am noticing increased pressure from my friends and family to come visit me at the farm. I am countering by saying I will be done with this seasons work within x weeks, and that they are more than welcome to visit me then. This has worked for 2 months now, but this pressure will increase progressively as I delay.

Monday June 27 - Day 57: Filtered out the pure PA crystals from the last batch of PA water after chilling it in the fridge for 12+ hours. Cleaned out all the beakers. Completed the last stage of the second batch of DDNP. Initiated the first stage of the last batch of DDNP. As I have now re-initiated my training I did a workout later that evening.

Tuesday June 28 - Day 58: Continued on the last DDNP batch. Went to the northern town to do some errands. Updating log. Later when searching online for efficient DDNP purification methods; I just learned that when acidifying the sodium picramate solution during DDNP manufacture, H2S and SO2 is released, which is potentially deadly. Crap, and I've been inhaling that diarrhea gas for three days now! I didn't even bother turning on the fan in the fume hood on a couple of occasions during that stage...

Wednesday June 29 - Day 59: Completed last batch of DDNP. I was now facing the task of purifying it, but was uncertain how to approach this. Was it necessary to purify it at all? How much would the VOD (velocity of detonation) suffer from not purifying it? Would it cut the VOD in half? My whole operation depended on the VOD from my primary being able to detonate the secondary explosive. After a few hours of research online I found that mixing the unpurified DDNP in acetone, then filtering it to another beaker with a lab filter or alternatively two coffee filters and then boiling the acetone away over a hot water bath, would be the optimal approach as the precipitation method with ice cold water method apparently didn't work for those that tried it. The problem now was that I only had one conical flask and one porcelain boiling dish (100ml) suitable for this type of purification method. I feared that this method would take a very long time with the lack of equipment. As I didn't have much choice I began the purification process. I managed to purify 1/3 of a batch (I had three batches) in 3 hours. As I got the hang of it I managed to reduce the time spent to 2 hours. Watching Spartacus - Blood & Sand, a brilliant series: -). It's my favourite one, in addition to Rome, Battlestar Galactica, Caprica and Stargate Universe! < 3. The Shield, Dexter, Sleeper Cell, Vampire Diaries and True Blood are good as well. All the series adhere to the multiculti ideology but such is life for the time being.

Thursday June 30 - Day 60: This house is infested with beetles. Just now I was about to reach for a chocolate in my goodie bag and a beetle had crawled in, ffs. And an hour ago, when I was putting on my nitril gloves to do another DDNP purification cycle, something was crawling in one of the fingers: -(Needless to say, I freaked out... After that I started killing every little insect in view. And I'm up to 18 just in the last hour... Parts of this house is from 1750 so it's probably several bug colonies in the walls.

I haven't slept at all since yesterday, trying to complete the last DDNP purification. That will complete the chemistry phase and I can move on to the last ANFO --> ANALFO phase. Addition of aluminium and micro balloons to the 1, 8 tons of ANFO. But before I start the last phase, I need to travel to the capital for resupply.

When I went inside the barn yesterday, a window had loosened and laid smashed on the floor. There are several signs of noticeable wear outside as well. Three large trees has blown down and two panels on the side of the barn has blown off. Anyone seeing this must think I don't give a damn... I haven't had the time or energy to sort that out yet. Perhaps when I'm done with the chemistry phase...

As I've now completed the purification process of 25g of DDNP (I will save an additional batch of unpurified 12g as backup), it's time for me to wrap up the chemistry phase. I do have 50L of impure nitro methane (30% RC fuel) in the barn but it's a bit tricky to purify it. I will see what I can do about it tonight. If I can't find an appropriate purification method Ill just skip the NM altogether. In any case; I can now dismantle the lab, again...

I talked to my friend, Peter, after missing one of his inc. calls earlier. He is visiting his girlfriend in a nearby town and wanted to stop by the farm... I fed him a story about me going to the capital and it worked, for now... However, it would not be suitable to receive visitors here as anyone stopping by would eventually understand that things are not what they seemed. I have to be careful not to answer his calls while he is so close to the farm. Manipulation and deceit can quickly turn around and act in your disfavour, if you are not careful. I guess I have been somewhat reckless in regards to maintaining my social network. Choosing complete isolation and asocial behaviour, in phases like these, would probably be a more pragmatical approach for ensuring secrecy. However, complete isolation and asocial behaviour can also defeat the whole purpose if you end up losing the love for the people you have sworn to protect. Because, why would you bless your people with the ultimate gift of love if every single person hates you?

Friday July 1 - Day 61: Ok, I have now completely dismantled the lab and stored all the equipment in boxes on the second floor. Removed all the glass from the broken window near the work bench in the barn and fastened a plastic sheet with duct tape.

It is now 8 days since I was forced to drastically reduce my winstrol intake and 2 days since I ran out of both winstrol and DBOL tabs. I'm noticing slight symptoms of withdrawal resulting in loss of muscle mass (down 3kg from my peak at 96kg). I'm also low on no-Xplode and protein powder. I need to restock in the capital. Damn, Peter is visiting his girlfriends sister in central Norway and Marius is unavailable due to work.

Saturday July 2 - Day 62: Going over the travel route for both plan A and B for the upcoming event, familiarizing myself with the driving routes and plotting in destinations in my Garmin GPS. I went to the gym and did a really hard workout. I was surprised I managed to lift as more or less as much as I could when I was at my best, in late April. However, I had to cancel the program half way because I was getting dizzy. Damn, just too long since I properly worked out.

Nice, I have enough winstrol for 20 more days (10mg x 100 tabs). I should have ended this cycle after 6-7 weeks though and I am now on my 9th week... Not healthy at all and I'm concerned about my liver values.

I took my mom out to dinner this evening, then hooked up with Axel for a coffee afterwards, discussing politics. Oh, how I missed these discussions...: -) Went back to the farm late in the evening.

Sunday July 3 - Day 63: Raining again... I planned to extract the armour cache today (the Pelican 1620 case I buried July 2010) or initiate evaporation purification of my 50ish liters of nitro methane, RC fuel. But I will have to wait for the first sunny day. Will have to begin the final phase shortly, the mixing of AL and micro balloons in the ANFO. I think I'll take a day off prior to the upcoming phase shift and just download some new trance tunes. Lange feat. Sarah Howells (amazing voice) has three songs I haven't yet downloaded; Lange Ft. Sarah Howells - Fireworks (Club Mix), Lange Ft. Sarah Howells - Out of the Sky (Original Mix) and Lange feat. Sarah Howells " Let It All Out" (Lange)

Noticing that the testo withdrawal is contributing to increased aggressiveness. As I'm now continuing with 50mg it will most likely pass. I wish it would be possible to somehow manipulate this effect to my advantage later on when it is needed. Because the state seems to very efficiently suppress fear. I wonder if it is possible to acquire specialized " aggressiveness" pills on the market. It would probably be extremely useful in select military operations, especially when combined with steroids and ECA stack...! It would turn you into a superhuman one-man-army for 2 hours! < 3

Monday July 4 - Day 64: Updated log for a few hours. I then began the preparations for a trip to extract the armour cache, I had dug down a year ago in Juli 2010. I am really concerned that someone has somehow found the cache. It would be a significant setback if that was to be the case. Or what if moisture had somehow penetrated the pelican case I used. It would be possible considering the fact that the area where the cache is located has permafrost during winter.

I did not look forward to this extraction trip as I had nightmarish memories from digging down the case in the first place, 12 months ago. The location is in a mosquito infested area and combined with the labour intensive nature of this sub mission, I remember it as a painfully exhausting and dreadful experience.

After packing the necessary supplies for the trip, I went by a hunting store and purchased upgraded ammunition (200 SP rounds, costing 300 euro) for my.223 Ruger Mini 14.

After a few hours driving I reached the destination. It took me around 30 minutes to locate the grave as I had camouflaged the dig sight very thoroughly, covering it with tree stumps etc. As expected, there was a big welcoming party waiting for me... Oh my, apparently, due to their great feast a year ago the mosquito population had seemed to triple for that particular spot... To counter this, I wore a raincoat which served to protect me from insect bites. However, labouring intensively in an air tight raincoat is extremely painful, even dangerous. I generated at least 2L of sweat by the time I was done so I had to constantly hydrate from my camel back. After two and a half painful hours I had extracted the armour crate and its content. Considering the fact that I do not have a secondary pistol, I disregarded filling up the crate with survival gear which was the original plan.

As for the content of the crate, it was in perfect condition. Not a single drop of liquid had penetrated the crate and no moisture had entered the rubber seal whatsoever. This means that one can bury electronic devices as well without it being affected at all!!!: -) These Pelican cases are simply amazing for this purpose. I'm sure you can bury it for several years, even below permafrost, perhaps up to 10 years, before the rubber seal rots away. I'm very impressed!

I arrived at the farm late in the evening. My neighbour had started harvesting my crops, as was the agreement made earlier.

Tuesday July 5 - Day 65: Spent a few hours on ammunition administration. Replaced most of the.223 HP (hollow point) rounds with SP rounds. According to my research; HP rounds for.223 tend, 80-90% of the time, to not mushroom as intended, which defeats much of their purpose. SP (soft point) on the other hand, at least for the.223 caliber, are more suitable for the purpose of inflicting maximum damage to vermin. I did other practical tasks this day including colouring some of my equipment black with permanent markers of various sizes. Emptied the armour case. Lol, I forgot I had put a batch of DBOL, winstrol and ECA stack in the case: -). Nice, now I don't have to make more ECA stack tabs from scratch.

I realize that If I am apprehended with all this equipment I will have serious problems trying to explain its intended usage...

Wednesday July 6 - Day 66: Changed the tertiary charge setup, and planned the last manufacturing phase accordingly in regards to ANALFO mixing. I will be creating 19 x 50kg bags containing 43kg of ANFO, 6, 45kg of AL (15%) and 1, 2kg of micro balloons (2, 7%). After that I will create 13 x 50kg bags containing 46kg of ANFO, 2, 3kg of AL (5%) and 1, 2kg of MB (2-3%). Re-located most of the ANFO from the spider cave to the processing bench.

Thursday July 7 - Day 67: Re-distributed the micro balloons from the 16kg bags into 13 individual plastic bags each containing 1, 2kg. Prepared 35 such bags - equivalent to 2, 5% of the 50kg fertilizer bags. Started to do the same with the aluminium powder, re-distributing them from the 36kg metal drums to individual plastic bags each containing 6kg. Finished 6 such bags, but after further consideration I will use 5kg instead of 6. I realize now that many of the warnings concerning aluminum powder is nothing more than scare mongering, probably to limit the legal liability of the producer. It is much safer to handle than people might expect, even in the micro fine 400 mesh (63 microns) powder I have. I have generated multiple clouds of aluminium and nothing has gone wrong. Just be very careful and you'll be fine.

As I was working on weighing the microballoons on my gram weight, using my 3M full face mask, I noticed an itch on my nose. That's when I saw a large black beetle on the inside of the mask...FFS. Freaked me out. I usually check for insects every time I wear gloves or the mask, but I must have missed it this time.

The neighbour is still harvesting my field outside. He originally told me it would only take 6 hours total but it's the third day now... As long as he is lurking around on my property he is going to slow me down significantly as I have to take extra security precautions. Not to mention I have to delay the nitro methane evaporation outside until he's done. I could probably have done it inside, but considering the fact that methane forms potentially explosive/flammable vapours I'm not readily keen on evaporating the RC fuel inside.

Friday July 8 - Day 68: I opened the remaining two aluminium drums and re-distributed the content in plastic bags (regular shopping bags). I then completed to weigh the content of the bags on a gram weight resulting in 18 bags a 5kg (10-12%), 10 bags a 2, 35kg (5-6%) and finally two bags a 6, 5 kg for the inner drum charge.

Saturday July 9 - Day 69: I started mixing the ANFO with the micro balloons and the aluminium powder. I completed 2 bags a 50kg. It was very labour intensive, much more than I imagined as I had to first open the ANFO bags, then distribute 12, 5kg of the content into a plastic 50L masonry bucket. I then poured the content into a plastic 100L masonry bucket. As much of the ANFO was packed into hard lumps I had to crush them with a rubber hammer. I then started to crush the smaller lumps with my hands until the ANFO was powdered. I then poured 25% of the micro balloon bag inside the bucket and mixed it (it will create clouds of micro balloon dust as you mix it), following by doing the same with the aluminium powder. Clouds of aluminum powder will be generated and the whole area will be covered in AL dust including your clothing, your hair, and every item you might have in a 5m radius. This is problematic as you end up spread AL dust everywhere as you walk around. I ended up assigning " mixing clothing and shoes" which I took off every time I left the room. It's the only thing you can do to prevent spreading it somewhat but you will still get stained by AL. I considered using a hazmat suit or my different kind of lightweight dust suit but the problem is that it gets too hot when combined with intensive labour like mixing.

As the ANALFO mix was complete I then poured the mix into an empty 50kg fertilizer bag. This took 30 minutes so processing a full 50kg bag of ANFO creating ANALFO took 2 hours. After I had prepared 2, 5 bags of ANALFO I was exhausted and decided to take a break. Mixing ANALFO is very messy and its especially annoying that you get aluminium dust everywhere.

Later that day while I was enjoying a meal, the neighbour stopped by. As I had just completed the mixing session I still had AL stains in my face and powder in my hair. I tried the best I could to quickly wash it off but my hair still had a silver tone and it looked very weird. The neighbour asked if he could fertilize my fields and remove some rocks as this would increase the yield of animal fodder by 100% (the current crop). As this meant that he would get several people to work on my property for a week's time I declined telling him that I had plans of my own.

Later that day, while I was watching an episode of True Blood, I saw a large van driving by the house and parking next to my car. There was at least 4 people inside. Nice, I thought; it's probably a SWAT team coming to skull-fuck me. The farmer must have tipped them off... Thank God, it was only 4 Polacks looking for worked and I sent them on their way. It would have been tempting to hire them to mix my ANALFO...< 3, hadn't it been for the fact that they would have understood what was up: -)

Later that evening I put a large plastic container box with 8L of 30% nitro methane/18% oil/52% methanol outside to test the evaporation method. Theoretically; the methanol should evaporate before the nitromethane starts to evaporate. As such; you just let the mix evaporate down from 8L to aproximately 4L. This should leave you with aprox 60% nitro and 36% oil which is, according to my sources, 100% more efficient as an oxidizer as diesel when mixed with ANFO or ANALFO. According to my source; 25-40% nitro is as efficient as diesel, so anything higher purity is better.

Sunday July 10 - Day 70: I mixed one more bag of ANALFO manually. There must be a better way than this... One single bag in 2 hours!? I will try to use my electrical concrete mixer instead. I bought it second hand for 150 euro. I am just very worried about three things when using a concrete mixer; the friction caused by the electrical stirrer, ANALFO/ANFO/AL in direct contact with metal, a spark from the electrical system. As these three factors can cause a detonation, I will keep my glock 34 close by in case I somehow survive an explosion... I feel I don't have a choice as mixing manually is just too fatiguing and time consuming. I need a method that allows me to mix at least 1 x 50kg bag every hour or faster. In any case; let me die another day...

The use of my electrical concrete mixer to blend the ANALFO went without much complication. As usual, I worry too much about safety...< 3 I poured in 46kg of ANFO and activated the mixer. The large and small lumps would not be crushed so I had to crush them with my hands manually. I then went on to mixing in the 1, 2 kg of micro balloons and the 5kg of aluminium powder (400 mesh/63 microns, leafed). It generated significant AL dust clouds and it didn't mix optimally. However, I was able to complete one bag of ANALFO in 90 minutes so I was able to improve my blending per bag by 30 minutes compared to the manual method. Also, using the concrete mixer is much less fatiguing. Perhaps with time, I will be able to reduce this to 60 minutes per bag. In any case; it is hard work for one person and I am really beginning to understand why Mr. McVeigh limited his manufacturing to 600kg. He probably encountered much of the issues I did and he probably had to learn everything the hard way just as I have done.

My RC fuel (30% nitro methane, 18% oil, 52% methanol) has been allowed to evaporate for 26 hours now (average 20-25C daytime, 10-15C nighttime) and the mix has now reduced its mass by 50%, from 7, 8 liters to 3, 9 liters. I poured the liquid into a 4L container. I noticed that the evaporation took considerable longer during the night. I