Ignition switch

• To remove the ignition switch, remove the bolt to detach the ignition switch from the steering stem upper bracket by using a center punch and hummer.

• To install the ignition switch, always use the new special bolt and follow the procedures below.

NOTE:

The spare ignition switch comes equipped with the special bolts, however, the bolt is also individually available as spare parts.

• Using the special bolts, attach the ignition switch on the steering stem upper bracket in place and run in the bolts with the special tool.

Torx wrench

• Continue turning the tool until the tool slips from the bolt head or the bolt head breaks off, then the bolt has become tightened to the proper specification.

< MMER

rPUNCH

, _" " '_-TORX WRENCH

;! (]-BOLT