Cushion lever

Insert the spacer into the bearing and check the play by moving the spacer up and down.

If an excessive play is noted, replace the bearing with a new one.

Inspect the spacer for any flaws or other damage.

Insert the spacer into the bearing and check the play by mov­ ing the spacer up and down. If an excessive play is noted, replace the bearing with a new one.

SHOCK ABSORBER

Using a dial gauge, check the pivot shaft runout and replace it if the runout exceeds the limit.

09900-20606: Dial gauge (1/100) 09900-20701: Magnetic stand

09900-21304: V-block set (100 mm) Service limit: 0.3 mm (0.01 in)

SWINGARM

• Remove the dust seals, washers and spacers from the swin­ garm pivot.

•

09941-44910: Swingarm bearing remover

CAUTION:

The removed bearings should be replaced with new ones.

CUSHION LEVER

• Remove the spacers.

•

09923-73210: Bearing remover

09930-30102: Sliding shaft

CAUTION:

The removed bearings should be replaced with new ones.

• Remove the spacer from the swingarm.

•

09930-30102: Sliding shaft

CAUTION:

The removed bearings should be replaced with new ones.