REASSEMBLY. • Oil each oil seal, and press-fit them into position with the finger tip.

⇐ ПредыдущаяСтр 51 из 131Следующая ⇒

• Oil each oil seal, and press-fit them into position with the finger tip.

CAUTION:

Do not reuse the oil seals.

•

Install the valve spring lower seats, CD (for exhaust) and @ (for intake). Be careful not to confuse the lower seat with the spring retainer ®·

•

Insert the valves, with their stems coated with high quality molybdenum disulfide lubricant (SUZUKI MOLY PASTE) all around and along the full stem length without any break.

CAUTION:

When inserting each valve, take care not to damage the lip of the stem seal.

99000-25140: SUZUKI MOLY PASTE

6.5 - 7.5 kg

.! }

• Install the valve springs with the small-pitch portion ® facing cylinder head. @ Large-pitch portion.

• Put on the valve spring retainer and, using the valve lifter, press down the springs, fit the cotter halves to the stem end, and release the lifter to allow the cotter CD to wedge in

between retainer and stem. Be sure that the rounded lip ®

of the cotter fits snugly into the groove ® in the stem end.

⇐ Предыдущая 46 47 48 49 505152 53 54 55 Следующая ⇒

Поделиться с друзьями:

mylektsii.su - Мои Лекции - 2015-2025 год. (0.005 сек.)Все материалы представленные на сайте исключительно с целью ознакомления читателями и не преследуют коммерческих целей или нарушение авторских прав Пожаловаться на материал