Axis Set

In the Integrate Setting interface, choose Ў°Axis SetЎ± to enter, show as:

Fig. 5-17

Press the Ў°Up/DownЎ± key to select the needed operation, for example, the X axis setting:

Fig. 5-18

Fig. 5-19

Press the Ў°Up/DownЎ± key to select the needed operation. Click on the Ў°ChooseЎ± key to change setting, Ў°NumberЎ± keys to set the value.

l Resolution: the resolution = the length that the laser head moving when the motor rotate a cycleЎБ1000 / the pulses that the driver output when the motor rotate a cycle.

About measurement:

Draw a 30*30 rectangle to calculate the resolution. When measuring, the width of the laser beam needs to be considered. The processed rectangle is as shown in figure below. Take the measured value of the X axis 34mm, and input 34 into the Want Size edit box and 30 into the Want Size edit box. Click ok the program will calculate out the right resolution. Other Axis is similar. When calculate the resolution of Y, the Real Size is the length of trace the beam moved.

Fig. 5-20

l Max Speed (mm/s): The maximum speed allowed for single-axis movement. This value decides the max. Engraving speed and cutting speed.

l Stop Speed (mm/s): The speed of start or stop during single-axis motion, i.e., the motion stops speed.

l Acc (mm/s2): The Max acceleration of this axis, the bigger the acceleration, the shorter the work time, and the stronger jitter of motion.

l Jerk (mm/s3): The acceleration of the acceleration change from the minimum acceleration to upgrade to the maximum acceleration— Or the changed from the maximum acceleration reduce to minimum acceleration during slowdown..The smaller the jerk, the weaker the jitter of motion, the slower of acceleration and deceleration. Otherwise, the jitter is stronger, the accelerating and decelerating is the faster.

l Max Range (mm): Maximum distance for axis can move.

l Direction Polarity: Classified into positive and negative, when the motion direction of the motor disaccords with the direction control buttons on the keyboard, you can change the direction polarity to make them consistent with each other.

l Limit Polarity: Classified into positive and negative, when the motor cannot return to the original position, you can change the limit polarity to make it normal.

l Key Polarity: The buttons on the control panel correspond to directions of the motion of the axes, if it moves to the right when you press the left, change the polarity.

l Reverse the polarity of the pulse: In the Axis Set, press Ў°12344321Ў± to display the setting window of the polarity of the pulse. Press Ў°EnterЎ± to reverse. Otherwise, press Ў°ESCЎ±.

Fig. 5-21