Snap ring pliers. Cork su rface ( 1 PC)

" Cork su rface" (1 PC)

CD Push rod

® Thrust washer

@ Thrust washer

(Thick ness: 2.5 mm)

@ Pri mary d ri ven gea r assembl y

® Bea ri ng

® Spacer

(j) Thr ust washer

(Thi ck ness: 2.0 mm)

® Cl utch sleeve h u b

® Spri ng washer seat

@ Spri ng washer

@ Lock washer

@ Push rod

@ Push piece

([4l Thr ust beari ng Pressure plate

• Install the thrust washers, CD and ®·

•

• Install the thrust washer ®.

•

Clutch sleeve: 50 - 70 N-m

hub nut (5.0 - 7.0 kg-m, 36.0 - 50.5 lb-ft) 09920-53710: Clutch sleeve hub holder

• After tightening the clutch sleeve hub nut, be sure to lock the nut by firmly bending the tongue of the washer.

•

Spri ng washer

seat -Dri ven plate

Dri ve plate No. 2

•

• Install the push rod ®, push piece ® and thrust bearing ®.

CAUTION:

The bearing face of the thrust bearing ® faces push piece side.

•

NOTE:

Tighten the clutch spring set bolts in the manner indicated, tightening them by degrees until they attain a uniform tightness.

Clutch spring set bolt: 7 - 11 N-m

(0.7 - 1.1 kg-m, 5.0 - 8.0 lb-ft)

• Install the oil separator outer cover CD.

•

NOTE:

The chamfered face ® of the generator stator spacer faces

outside.

•

(For U.S.A. model)

99000-32020: THREAD LOCK SUPER " 13338"

(For the other models)

99000-32110: THREAD LOCK SUPER " 1322"

•

NOTE:

Apply a small quantity of THREAD LOCK SUPER " 1303" / " 1305" to the generator rotor bolt.

(For U.S.A. model)

(For the other models)

99000-32100: THREAD LOCK SUPER " 1305"

•

Tightening torque: 110 - 130 N-m

(11.0 - 13.0 kg-m, 79.5 - 94.0 lb-ft)